View HS-26061_4826578.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HS-2606
Eden Embedded Engine Board
*CompactFlash*PCMCIA*Mini PCI* *CRT/Panel*TV-Out*LAN*Audio* *ATA/33/66/100*4 COM*USB2.0*WDT*
Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advised of the possibility of such damage(s). This manual is copyrighted and BOSER Technology Co., Ltd. reserves all documentation rights. Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. BOSER Technology Co., Ltd. reserves the right to change or improve the contents of this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does it make any commitment to update the information contained herein.
Trademarks Trademarks
BOSER is a registered trademark of BOSER Technology Co., Ltd. ISB is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc. AMI is a registered trademark of AMI Software, Inc. All other trademarks, products and or product names mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners.
(c) Copyright 2008 BOSER Technology Co., Ltd. All Rights Reserved. Edition 1.6, February 26, 2008
Table of Contents
Chapter 1 General Description ..................................1
1.1 Major Features ....................................................................... 2 1.2 Specifications ........................................................................ 3 1.3 Board Dimensions................................................................. 4
Chapter 2 Chapter 3
3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22
Unpacking ..................................................5 Hardware Installation ..............................7
2.1 Opening the Delivery Package............................................. 5 2.2 Inspection............................................................................... 5 Before Installation ................................................................. 7 Board Layout ......................................................................... 8 Jumper List ............................................................................ 9 Connector List ....................................................................... 9 Configuring the CPU ............................................................. 9 System Memory ................................................................... 10 CMOS Data Clear................................................................. 10 Power and Fan Connectors................................................ 10 System Front Panel Control ............................................... 11 VGA Controller .................................................................... 11 TV-Out Connector ............................................................... 13 Ethernet Connector............................................................. 13 Audio Connectors ............................................................... 14 PCI E-IDE Drive Connector................................................. 15 Serial Port Connectors ....................................................... 16 USB Connector.................................................................... 16 Keyboard/Mouse Connectors ............................................ 17 Watchdog Timer .................................................................. 17 GPIO Function ..................................................................... 18 Mini PCI Slot......................................................................... 19 CompactFlash Connector................................................ 19 PCMCIA Connector ............................................................. 19
Chapter 4
4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 5.1 5.2 5.3 5.4
Award BIOS Setup ................................. 21
Starting Setup...................................................................... 21 Using Setup ......................................................................... 22 Main Menu............................................................................ 23 Standard CMOS Features................................................... 24 Advanced BIOS Features ................................................... 25 Advanced Chipset Features............................................... 26 Integrated Peripherals ........................................................ 28 Power Management Setup ................................................. 30 PnP/PCI Configurations...................................................... 31 Frequency/Voltage Control ................................................ 32
Chapter 5
Software Utilities..................................... 33
VGA Driver Installation ....................................................... 33 LAN Driver Installation........................................................ 43 Audio Driver Installation..................................................... 53 USB2.0 Driver Installation .................................................. 59
Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions:
Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This helps to discharge any static electricity on your body. Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. Fasten the ALLIGATOR clip of the strap to the end of the shielded wire lead from a grounded object. Please wear and connect the strap before handle the product to ensure harmlessly discharge any static electricity through the strap. Please use an anti-static pad when putting down any components or parts or tools outside the computer. You may also use an anti-static bag instead of the pad. Please inquire from your local supplier for additional assistance in finding the necessary anti-static gadgets.
NOTE:
DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC PROTECTIONS.
Chapter 1
General Description
The HS-2606 is a 100/133MHz FSB VIA CLE266/VT8235 chipset-based board designed for Mini PCI Local Bus VIA Eden 1GHz Embedded CPU. These features combine and make the HS-2606 and ideal all-in-one industrial single board computer. Additional features include and enhanced I/O with CF, PCMCIA, CRT/Panel, audio, LAN TV-Out, 4 COM, and USB2.0 interfaces. Its onboard ATA/33/66/100 to IDE drive interface architecture allows the HS-2606 to supports data transfers of 33, 66 or 100MB/sec. To one IDE drive connection. Designed with the VIA CLE266/VT8235 core logic chipset, the board supports VIA Eden 1GHz Embedded CPU. The VIA CLE266 integrated S3 3D supports CRT display up to 1400 x 1050 @ 60Hz, and panel display up to 1400 x 1050. HS-2606 offers PCMCIA connector and CompactFlash reader in addition. +7~+26V wide range single DC power in can make HS-2606 suitable for all kinds of environments even more.
1
System memory is also sufficient with the one 200-pin SO-DDR socket that can supports up to 1GB. Additional onboard connectors include 4 USB2.0 port providing faster data transmission. And one external RJ-45 connector for 10/100 Based Ethernet use.
1.1
Major Features
The HS-2606 comes with the following features:
VIA Eden ESP10000 1GHz embedded CPU One SO-DDR socket with a max. capacity of 1GB VIA CLE266/VT8235 chipset Winbond W83697UF super I/O chipset VIA CLE266 graphics controller RealTek RTL8139DL Ethernet controller AC97 3D audio controller Fast PCI ATA/33/66/100 IDE controller CF, PCMCIA, 4 COM, 4 USB2.0 TV-Out function +7~+26V wide range single DC power in
2
1.2
Specifications
CPU: VIA Eden processor 1GHz Memory: One SO-DDR socket supports up to 1GB Chipset: VIA CLE266/VT8235 I/O Chipset: Winbond W83697UF CompactFlash: One, Type I/II IDE interface adapter PCMCIA: Two PC Card or CardBus slots PCI Slot: One, Type I mini PCI slot VGA: VIA CLE266 integrated S3 3D supports AGP Bus and Hardware MPEG-2 TV-Out: Supports PAL or NTSC TV system Ethernet: RealTek RTL8139DL 10/100 Based LAN Audio: AC97 3D audio controller IDE: One 2.0-pitch 44-pin IDE connector Serial Port: 16C550 UART-compatible RS-232 x 4 serial ports with 16-byte FIFO USB: 4 internal USB2.0 ports Keyboard/Mouse: PS/2 6-pin Mini DIN BIOS: Award PnP Flash BIOS Watchdog Timer: Software programmable time-out intervals from 1~255 sec. CMOS: Battery backup Power In: +7~+26V wide range single DC power in Temperature: 0~+60C (operating) Dimensions: 14.5(L) x 10.2(W) cm
3
1.3
Board Dimensions
4
Chapter 2
Unpacking
2.1 Opening the Delivery Package
The HS-2606 is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Saftey instructions in front of this manual describe anti-static precautions and procedures.
2.2
Inspection
After unpacking the board, place it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment. Ground the board and exercise extreme care to prevent damage to the board from static electricity. Integrated circuits will sometimes come out of their sockets during shipment. Examine all integrated circuits, particularly the BIOS, processor, memory modules, ROM-Disk, and keyboard controller chip to ensure that they are firmly seated. The HS-2606 delivery package contains the following items: HS-2606 Board x 1 Utility CD Disk x 1 Cables Package x 1 Jumper Bag x 1 User's Manual
5
NO.
1 2 3 4 5 6
Cables Package Description
4-pin power cable x 1 MIC/Audio cable x 1 8-pin USB split type cable x 1 PS/2 KB/MS transfer cable x 1 RS-232 cable x 4 IDE flat cable x 1
It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately.
6
Chapter 3
Hardware Installation
This chapter provides the information on how to install the hardware using the HS-2606. This chapter also contains information related to jumper settings of switch, and watchdog timer selection etc.
3.1
Before Installation
After confirming your package contents, you are now ready to install your hardware. The following are important reminders and steps to take before you begin with your installation process.
1. Make sure that all jumper settings match their default settings and CMOS setup correctly. Refer to the sections on this chapter for the default settings of each jumper. Go through the connections of all external devices and make sure that they are installed properly and configured correctly within the CMOS setup. Refer to the sections on this chapter for the detailed information on the connectors. Keep the manual and diskette in good condition for future reference and use.
2.
3.
7
3.2
Board Layout
8
3.3
Jumper List
Default Setting
Clear CMOS: Normal Operation Panel Voltage Select: +3.3V
Jumper
JBAT1 JP3
Setting
Short 1-2 Short 1-2
Page
10 11
3.4
Connector List
Connector Definition
4-pin Power In Connector 2-pin ATX Power In Connector PS/2 6-pin Mini DIN KB/MS Connector RJ-45 Connector COM 1~COM 4 Connector (5x2 header) 15-pin CRT Connector RCA Connector IDE Connector CompactFlash Connector 6-pin KB/MS Header SO-DDR Socket Fan Power In Connector Line In Connector GPIO Connector USB Connector System Front Panel Control MIC In/Audio Out Connector 44-pin Panel Connector PCMCIA Connector Mini PCI Connector
Page
10 10 17 13 16 11 13 15 19 17 10 10 14 18 16 11 14 11 19 19
CN1 CN2 CN3 CN4 CN5/CN7/CN8/CN9 CN6 CN10 CN11 CN12 CN13 DIM1 FN1 J1 J3 J4/J5 JP1 JP2 LCD1 P1 PC1
3.5
Configuring the CPU
The HS-2606 embedded with a VIA Eden ESP10000 1GHz embedded CPU, user don't need to adjust the frequently and check speed of the CPU. The new VIA Eden ESP10000 processors based on the Nehemiah core build on the VIA Eden platform lineup, enabling improved digital media performance with ultra low power consumption.
9
3.6
System Memory
The HS-2606 provides one 200-pin SO-DDR socket at locations DIM1. The maximum capacity of the onboard memory is 1GB.
3.7
CMOS Data Clear
The HS-2606 has a Clear CMOS jumper on JBAT1.
JBAT1: Clear CMOS
Options
Normal Operation (default) Clear CMOS
Settings
Short 1-2 Short 2-3
1 3
IMPORTANT: Before you turn on the power of your system, please set JBAT1 to Short 1-2 for normal operation.
3.8
Power and Fan Connectors
HS-2606 provides one 4-pin power connector at CN1. And one 2-pin ATX power in at CN2. Connector FN1 onboard HS-2606 is a 3-pin fan power output connector. And HS-2606 supports +5V fan only.
CN2: 2-pin ATX Power In Control
PIN Description
1 2 PS_ON 5VSB
12
CN1: 4-pin DC Power In Connector
PIN Description
1 2 3 4 +7~+26V GND GND +7~+26V
1 4
FN1: Fan Power In Connector
PIN
1 2 3
Description
GND +5V N/C
1 3
10
3.9
System Front Panel Control
PIN Description
1 3 5 7 9 11 13 15 VCC GND N/C Speaker GND Reset Switch 330 Pull +5V HDD LED
JP1: System Front Panel Control
PIN
2 4 6 8 10 12 14 16
Description
330 Pull +5V GND LAN Link LED GND PW Button GND LAN TX/RX LED GND
Connector JP1 Orientation
1 Speaker 3 5 7 Reset Button 9 11 13 15 2 4 6 8 10 12 14 16 PWR LED LAN Link LED PWR Button LAN TX/ RX LED
HDD LED
3.10 VGA Controller
The HS-2606 provides two connection methods of a VGA device. CN6 offers a single standard CRT connector while LCD1 is the 44-pin panel connector. VIA CLE266 VGA chipset shared main memory 8/16/32MB, and provides high quality DVD video playback. HS-2606 also provides Hardware MPEG-2. CRT resolution is up to 1400 x 1050 @60Hz, Panel resolution is up to 1400 x 1050. And LCD at 32bpp is not supported with SXGA + Panel.
11
CN6: 15-pin CRT Connector
PIN Description PIN Description
1 3 5 7 9 11 13 15 Red Blue GND GND N/C N/C HSYNC SCL 2 4 6 8 10 12 14 Green N/C GND GND GND SDA VSYNC
1 6 11
5 10 15
LCD1: 44-pin Panel Connector
PIN
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43
Description
N/C GND VLCD ENPVEE GFPD0 GFPD2 GFPD4 GFPD6 GFPD8 GFPD10 GFPD12 GFPD14 GFPD16 GFPD18 GFPD20 GFPD22 N/C SHFLCK GFPDEN GND N/C N/C
PIN
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44
Description
N/C GND ENAVDD GND GFPD1 GFPD3 GFPD5 GFPD7 GFPD9 GFPD11 GFPD13 GFPD15 GFPD17 GFPD19 GFPD21 GFPD23 N/C GFPVS GHPHS FPBKLP N/C N/C
1
2
43
44
NOTE: Please set the proper voltage of your panel use JP3 before proceeding on installing it.
12
The HS-2606 has an onboard jumper that selects the working voltage of the flat panel connected to the system. Jumper JP3 offers two voltages setting for the user.
JP3: Panel Voltage Select
Options
+3.3V (default) +5V
Settings
Short 1-2 Short 2-3
1 3
3.11 TV-Out Connector
The HS-2606 can supports TV-Out function which input could be up to 800 x 600 graphics resolutions. World Wide Video standards are supported including NTSC-M (North America, Taiwan), NTSC-J (Japan), PAL-B, D, G, H, I (Europe Asia), PAL-M (Brazil), PAL-N (Uruguay, Paraguay) and PAL-NC (Argentina).
CN10: RCA Connector (for TV-Out function)
PIN Description
1 2 3 4 SPDIFO GND GND GND
3.12 Ethernet Connector
The HS-2606 provides two external RJ-45 interface connectors. Please refer to the following for its pin information.
CN4: RJ-45 Connector
PIN Description
1 2 3 4 5 6 7 8 TX+ TXRX+ R/C GND R/C GND RXR/C GND R/C GND
8
1
13
3.13 Audio Connectors
The HS-2606 has an onboard AC97 3D audio controller. The following tables list the pin assignments of the Line In/Audio Out connector.
JP2: MIC In/Audio Out Connector
PIN Description PIN Description
1 3 5 7 AOUTL GND MIC IN GND 2 4 6 8 AOUTR GND N/C GND
1 7 2 8
J1: Line In Connector
PIN Description PIN Description
1 3 LINE R GND 2 4 GND LINE L
1
4
14
3.14 PCI E-IDE Drive Connector
CN11 is a standard 44-pin 2.0-pitch connector daisy-chain driver connector serves the PCI E-IDE drive provisions onboard the HS-2606. A maximum of two ATA/33/66/100 IDE drives can be connected to the HS-2606 via CN11.
CN11: IDE Connector
PIN
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43
43 44
Description
Reset DATA 7 DATA 6 DATA 5 DATA 4 DATA 3 DATA 2 DATA 1 DATA 0 GND PDREQ IOW# IOR# PIORDY RPDACKInterrupt RPDA1RPDA0RPCS1HDD Active VCC GND
PIN
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44
Description
GND DATA 8 DATA 9 DATA 10 DATA 11 DATA 12 DATA 13 DATA 14 DATA 15 N/C GND GND GND GND GND N/C PATA66 RPDA2RPCS3GND VCC N/C
1 2
15
3.15 Serial Port Connectors
The HS-2606 offers NS16C550 compatible UARTs with Read/ Receive 16-byte FIFO serial ports and internal 10-pin headers.
CN5/CN7~CN9: COM 1~COM 4 Connector (5x2 Header)
PIN Description PIN Description
1 3 5 7 9 DCD RXD TXD DTR GND 2 4 6 8 10 DSR RTX CTX RI N/C
9 10 1 2
3.16 USB Connector
The HS-2606 provides two 8-pin connectors, at location J4 and J5, for four USB2.0 ports to the HS-2606.
J4/J5: USB2.0 Connector
PIN
1 3 5 7
Description
VCC BD2-/ BD0BD2+/ BD0+ GND
PIN
2 4 6 8
Description
VCC BD3-/BD1BD3+/BD1+ GND
16
3.17 Keyboard/Mouse Connectors
The HS-2606 offers two possibilities for keyboard/mouse connections. The connections are via CN3 for an external PS/2 type keyboard/mouse OR CN13 for 6-pin header.
CN3: PS/2 6-pin Mini DIN KB/MS Connector
PIN
1 2 3 4 5 6
Description
Keyboard Data Mouse Data GND +5V Keyboard Clock Mouse Clock
6 4 2 5 3 1
CN13: 6-pin Keyboard/Mouse Connector
PIN
1 2 3 4 5 6
Description
Keyboard Clock Keyboard Data Mouse Clock Mouse Data +5V GND
6
1
3.18 Watchdog Timer
Once the Enable cycle is active a Refresh cycle is requested before the time-out period. This restarts counting of the WDT period. When the time counting goes over the period preset of WDT, it will assume that the program operation is abnormal. A System Reset signal will restart when such error happens. The following sample programs show how to enable, disable and refresh the watchdog timer:
17
;---------------------------------------------------------------;Enter the WDT function mode, interruptible double-write ;---------------------------------------------------------------MOV DX, 4EH MOV AL, 87H OUT DX, AL OUT DX, AL ;---------------------------------------------------------------;Configuration logical device 8, configuration register CRF30 ;---------------------------------------------------------------MOV DX, 4EH MOV AL, 07H OUT DX, AL ;point to Logical Device Number Reg. MOV DX, 4FH MOV AL, 08H OUT DX, AL ;select logical device 8 MOV DX, 4EH MOV AL, 30H OUT DX, AL ;select CRF30 MOV DX, 4FH MOV AL, 01H OUT DX, AL ;update CRF30 with value 01H MOVDX, 4EH MOV AL, F3H OUT DX, AL ;select CRF3 (select WDTO count mode) MOV DX, 4FH MOV AL, 00H OUT DX, AL ;update CRF3 with value 00H (bit 2:0=second; 1=minute) MOV DX, 4EH MOV AL, F4H OUT DX, AL ;select CRF4 (WDTO Time-out value) MOV DX, 4FH MOV AL, 05H OUT DX, AL ;update CRF4 with value 05H Bit[7:0] = 00 Time-out Disabled 01 Time-out occurs after 1 second/minute 02 Time-out occurs after 2 second/minute . . ff Time-out occurs after 255 second/minute
3.19 GPIO Function
The HS-2606 offers four general purpose I/O ports with the following capabilities:
I2C/SMB Support Thermal Detect Notebook Lid Open/close Detect Battery Low Detect
J3: GPIO Connector
PIN Description PIN Description
1 3 GPIO8 GPIO10 2 4 GPIO9 GPIO11
1
4
18
3.20 Mini PCI Slot
HS-2606 supports a mini PCI connector at location PC1. The peripheral component with standard TypeI mini PCI can be used. For particular requirement, please refer to "BOSER Mini PCI Series" product on website or contact with us.
3.21 CompactFlash Connector
The HS-2606 also offers a Type I/II CompactFlash connector which is IDE interface located at the solder side of the board (beneath the SO-DIMM connector). The designated CN12 connector, once soldered with an adapter, can hold CompactFlash cards of various sizes. Please turn off the power before inserting the CF card. Inserting a CompactFlash card into the adapter is not a difficult task. The socket and card are both keyed and there is only one direction for the card to be completely inserted. Refer to the diagram on the following page for the traditional way of inserting the card.
PC Si B de S o Vi lde ew r
3.22 PCMCIA Connector
HS-2606 built-in two CardBus/PCMCIA interface connector at location P1.
CE
Fa Ma br de iq in ue J A ap u an Ja / po n
C F
om pa ct Fl as hT R M ea rS id e
C
19
This page is the blank page.
20
Chapter 4
Award BIOS Setup
The HS-2606 uses Award BIOS for the system configuration. The Award BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options that could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features.
4.1
Starting Setup
The Award BIOS is immediately activated when you first power on the computer. The BIOS reads the system information contained in the CMOS and begins the process of checking out the system and configuring it. When it finishes, the BIOS will seek an operating system on one of the disks and then launch and turn control over to the operating system. While the BIOS is in control, the Setup program can be activated in one of two ways:
1. By pressing immediately after switching the system on, or 2. By pressing the key when the following message appears briefly at the bottom of the screen during the POST (Power On Self Test).
Press DEL to enter SETUP. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing , , and keys. If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will be asked to... PRESS F1 TO CONTINUE, DEL TO ENTER SETUP
21
4.2
Using Setup
In general, you use the arrow keys to highlight items, press to select, use the and keys to change entries, and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
Esc key Move to previous item Move to next item Move to previous item Move to previous item Main Menu -- Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu Decrease the numeric value or make changes Increase the numeric value or make changes Increase the numeric value or make changes Decrease the numeric value or make changes Reserved Change color from total 8 colors. F2 to select color forward F2 to select color backward Reserved Reserved Reserved Reserved Reserved Reserved Save all the CMOS changes, only for Main Menu
PgUp key PgDn key + key - key F1 key F2 key F3 key F4 key F5 key F6 key F7 key F8 key F9 key F10 key
22
4.3
Main Menu
Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press to enter the sub-menu.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving
Esc: Quit F9: Menu in BIOS F10: Save & Exit Setup
: Select Item
NOTE:
A brief description of the highlighted choice appears at the bottom of the screen.
23
4.4
Standard CMOS Features
The standard CMOS is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, you must set the HDD mode to LBA mode. Please use the IDE setup utility in BIOS setup to install the HDD correctly.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Time (hh:mm:ss) IDE IDE IDE IDE Primary Master Primary Slave Secondary Master Secondary Slave Mon, Aug 9 2004 10 : 32 : 57 [Auto] [Auto] [Auto] [Auto] [EGA/VGA] [All, But Keyboard] 640K 56320K 57344K Item Help
Video Halt On Base Memory Extended Memory Total Memory
: Select Item F5: Previous Values
+/-/PU/PD: Value
F10: Save
Esc: Quit
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
24
4.5
Advanced BIOS Features
This section allows you to configure your system for the basic operation. You have the opportunity to select the system's default speed, boot-up sequence, keyboard operation, shadowing and security.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced CMOS Features
Virus Warning CPU Internal Cache External Cache CPU L2 Cache ECC Checking Processor Number Feature Quick Power On Self Test First Boot Device Second Boot Device Third Boot Device Boot Other Device Boot Up NumLock Status Gate A20 Option Typematic Rate Setting Typematic Rate (Chars/Sec) Typematic Delay (Msec) Security Option MPS Version Control For OS OS Select For DRAM > 64MB Report No FDD For WIN 95 Video BIOS Shadow Small Logo(EPA) Show [Disabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [HDD-0] [CDROM] [HDD-1] [Enabled] [On] [Fast] [Disabled] 6 250 [Setup] [1.4] [Non-OS2] [Yes] [Enabled] [Enabled] Item Help
: Select Item F5: Previous Values
+/-/PU/PD: Value
F10: Save
Esc: Quit
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
25
4.6
Advanced Chipset Features
This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses. It must be stated that these items should never be altered. The default settings have been chosen because they provide the best operating conditions for your system. You must consider making any changes only if you discover that the data has been lost while using your system.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Click/Drive Control AGP & P2P Bridge Control CPU & PCI Bus Control Memory Hole System BIOS Cacheable Video RAM Cacheable VGA Share Memory Size Select Display Device TV_type TV_Connector TV_Layout Panel Type
: Select Item F5: Previous Values
[Press Enter] [Press Enter] [Press Enter] [Disabled] [Enabled] [Enabled] [32M] [CRT] [NTSC] [CVBS] [Default] [07]
F10: Save Esc: Quit F6: Fail-Safe Defaults
Item Help
+/-/PU/PD: Value
F1: General Help
F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
DRAM Clock/Drive Control
Current FSB Frequency Current DRAM Frequency DRAM Clock DRAM Timing DRAM CAS Latency Bank Inter leave Precharge to Active (Trp) Active to Precharge (Tras) Active to CMD (Tred) DRAM Command Rate
: Select Item F5: Previous Values
Item Help [By PSD] [By PSD] 2.5 Disabled 3T 6T 3T [2T Command]
F10: Save Esc: Quit F1: General Help F6: Fail-Safe Defaults F7: Optimized Defaults
+/-/PU/PD: Value
26
Phoenix - AwardBIOS CMOS Setup Utility
AGP & P2P Bridge Control
AGP AGP AGP AGP AGP AGP AGP Aperture Size Mode Driving Control Driving Value Fast Write Master 1 WS Write Master 1 WS Read [64M] [4X] [Auto] DA [Disabled] [Disabled] [Disabled] Item Help
: Select Item F5: Previous Values
+/-/PU/PD: Value
F10: Save
Esc: Quit
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
CPU & PCI Bus Control
CPU to PCI Write Buffer PCI Master 0 WS Write PCI Delay Transaction [Enabled] [Enabled [Disabled] Item Help
: Select Item F5: Previous Values
+/-/PU/PD: Value
F10: Save
Esc: Quit
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
27
4.7
Integrated Peripherals
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
VIA OnChip IDE Device VIA OnChip PCI Device Super IO Device Init Display First Onboard Serial Port 3 Serial Port 3 Use IRQ Onboard Serial Port 4 Serial Port 4 Use IRQ
: Select Item F5: Previous Values
[Press Enter] [Press Enter] [Press Enter] [PCI Slot] [3E8] [IRQ10] [2E8] [IRQ11]
F10: Save Esc: Quit
Item Help
+/-/PU/PD: Value
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
VIA OnChip IDE Device
OnChip IDE Channel0 OnChip IDE Channel1 IDE Prefetch Mode Primary Master PIO Primary Slave PIO Secondary Master PIO Secondary Slave PIO Primary Master UDMA Primary Slave UDMA Secondary Master UDMA Secondary Slave UDMA IDE HDD Block Mode [Enabled] [Enabled] [Enabled] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Enabled] Item Help
: Select Item F5: Previous Values
+/-/PU/PD: Value
F10: Save
Esc: Quit
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
28
Phoenix - AwardBIOS CMOS Setup Utility
VIA OnChip PCI Device
VIA-3058 AC97 Audio OnChip USB Controller OnChip EHCI Controller USB Device Function USB Keyboard Support USB Mouse Support [Auto] [All Enabled] [Enabled] [Disabled] [Disabled] [Disabled] Item Help
: Select Item F5: Previous Values
+/-/PU/PD: Value
F10: Save
Esc: Quit
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
Onboard Serial Port 1 Onboard Serial Port 2 UART Mode Select RxD , TxD Active IR Transmission Delay UR2 Duplex Mode Use IR Pins Midi Port Address Midi Port IRQ [3F8/IRQ4] [2F8/IRQ3] [Normal] [Hi,Lo] [Enabled] [Half] [IR-Rx2Tx2] [Disabled] 10 Item Help
: Select Item F5: Previous Values
+/-/PU/PD: Value
F10: Save
Esc: Quit
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
29
4.8
Power Management Setup
The power management setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his owns style of computer use.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI function ACPI Suspend Type Power Management Option HDD Power Down Suspend Mode Video Off Option Video Off Method MODEM Use IRQ Soft-off by PWRTYN Run VGABIOS if S3 Resume IRQ/Event Activity Detect
: Select Item F5: Previous Values
[Enabled] [S1(POS)] [User Define] [Disabled] [Disabled] [Suspend Off] [V/H SYNC+Blank] [3] [Instant-off] [Auto] [Press Enter]
F10: Save Esc: Quit
Item Help
+/-/PU/PD: Value
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
IRQ/Event Activity Detect
PS2KB Wakeup Select PS2KB Wakeup from S3/S4/S5 Power Button Lock PS2MS Wakeup from S3/S4/S5 USB Resume from S3 VGA LPT & COM HDD & FDD PCI Master PowerOn By PCI Card Modem Ring Resume RTC Alarm Resume Date (of Month) Resume Time (hh:mm:ss) IRQs Activity Monitoring
: Select Item F5: Previous Values
[Hot Key] [Disabled] Enabled [Disabled] [Disabled] [OFF] [LPT/COM] [ON] [OFF] [Disabled] [Disabled] [Disabled] 0 0:0:0 [Press Enter]
F10: Save Esc: Quit
Item Help
+/-/PU/PD: Value
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
30
Phoenix - AwardBIOS CMOS Setup Utility
IRQs Activity Monitoring
Primary INTR IRQ3 (COM 2) IRQ4 (COM 1) IRQ5 (LPT 2) IRQ6 (Floppy Disk) IRQ7 (LPT 1) IRQ8 (RTC Alarm) IRQ9 (IRQ2 Redir) IRQ10 (Reserved) IRQ11 (Reserved) IRQ12 (PS/2 Mouse) IRQ13 (Coprocessor) IRQ14 (Hard Disk) IRQ15 (Reserved)
: Select Item F5: Previous Values
[ON] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] [Enabled] [Enabled] [Enabled] [Disabled]
+/-/PU/PD: Value F10: Save Esc: Quit F6: Fail-Safe Defaults
Item Help
F1: General Help
F7: Optimized Defaults
4.9
PnP/PCI Configurations
This section describes the configuration of the PCI bus system. Peripheral Components Interconnect (PCI), is a system that allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed Reset Configuration Data Resources Controlled By IRQ Resources PCI/VGA Palette Snoop Assign IRQ For VGA Assign IRQ For USB
: Select Item F5: Previous Values
[No] [Disabled] [Auto(ESCD)] Press Enter [Disabled] [Enabled] [Enabled]
F10: Save Esc: Quit
Item Help
+/-/PU/PD: Value
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
31
4.10 Frequency/Voltage Control
Phoenix - AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
VIA C3 Clock Ratio Auto Detect DIMM/PCI Clk Spread Specturm CPU Host/PCI Clock [Default] [Enabled] [Disabled] [Default] Item Help
: Select Item F5: Previous Values
+/-/PU/PD: Value
F10: Save
Esc: Quit
F1: General Help
F6: Fail-Safe Defaults
F7: Optimized Defaults
32
Chapter 5
Software Utilities
The chapter contains the detailed information of VGA, LAN, audio, and USB2.0 driver installation procedures. The drivers are located in the following directories of the utility disk: VGA Driver: \VGA\WIN98_ME or \VGA\XP_2K LAN Driver: \LAN Audio Driver: \AC97 USB2.0 Driver: \USB20\2K or \USB\XP
5.1
1.
VGA Driver Installation
With the Utility CD Disk still in your CD-ROM drive, open the File Manager and then select the VGA driver folder.
5.1.1 WIN95/98
33
2.
Select the operation system of your computer to proceed with the installation process.
3.
Click on the "Setup.exe" and to go setup.
34
4.
Once the Welcome screen appears on the screen, make sure to close applications that are running and then click the Next> button.
5.
When the display below appears on your screen, Setup is already ready to install and copy the related files onto your hard drive. Click on the Next button to proceed.
35
6.
After the installation finishes, you will be prompted to restart your system. We recommend you to reboot your computer to allow the new settings to take effect. Click on the Finish button to reboot.
5.1.2 VGA Driver Installation for WIN2K/XP
NOTE: Please make sure you have already installed Service Pack 6.0.
1.
With the Utility CD Disk still in your CD ROM drive, open the File Manager and then select the VGA driver folder.
36
2.
Select the operating system of your computer to proceed with the installation process.
3.
Click on the "Setup.exe" and to go setup.
37
4.
Once the Welcome screen appears on the screen, make sure to close applications that are running and then click the Next button.
5.
When the display below appears on your screen, Setup is already ready to install and copy the related files onto your hard drive. Click on the Next button to proceed.
38
6.
After the installation finishes, you will be prompted to restart your system. We recommend you to reboot your computer to allow the new settings to take effect. Click on the Finish button to reboot.
5.1.3 VGA Driver Installation for WIN NT4.0
1.
Click the Start button on the lower left hand corner of your screen, then select Setting. Choose Control Panel and double-click on the Display icon to launch its Display Properties window.
39
2.
Click on the Settings tab, and then choose Display Type.
3.
In the Change Display Type window, click on Have Disk.
40
4.
Specify the path of the new driver and then press on Enter. (If in driver E:, type E:\Vga\WinNT)
5.
Select VIA/S3G UniChrome Graphics, then click OK or press Enter.
41
6.
You will see warning panel about Third Party Drivers. Click on Yes to finish the installation.
7.
Once the installation is completed, you must shut down the system and restart for the new driver to take effect.
42
8.
Press on the OK button as soon as you have located the path of your driver.
5.2
1.
LAN Driver Installation
With the Utility CD Disk still in your CD ROM drive, right click on My Computer icon from the Windows menu. Select on System Properties and then proceed to the Device Manager from the main menu.
5.2.1 LAN Driver Installation for WIN95/98/2K
43
2.
Select on PCI Ethernet Controller from Other devices list, right-click and then select on Properties.
3.
The PCI Ethernet Controller Properties screen then appears, allowing you to reinstall the driver. Select Driver from the main menu to proceed.
44
4. 5.
The window then displays the current status of your LAN driver. Press on Update Driver button to continue. The program will then launch the Update Device Driver Wizard window that will install your device driver. Click on the Next button to proceed to the next step.
6.
The Update Device Driver Wizard will then ask you to specify, by ticking, the path of the new driver. Tick on the open boxes where you require the program to search for the device driver then click on the Browse button to manually specify the path. (If in E:, type E:\HS-2606 Driver\LAN\/w/in98) Update Device Driver Wizard will ask are you sure to updated driver, tick on update, and then press Next to continue.
7.
45
8.
Once the program detects the device driver (*.inf) file from your specified location, it will automatically copy the files into your hard drive.
9.
The program then copies the necessary files from your Windows installation disk to complete the driver setup process. Once the driver is completely installed, the following message appears on your display. Click on the Finish button to proceed.
46
10.
Restart your computer to make the new system settings take effect. Click on the Yes button when the screen below appears and your LAN Driver for Win95 and Win98 are now completely installed.
5.2.2 LAN Driver Installation for WIN NT4.0
1.
With the Utility CD Disk still in your CD ROM drive, right click on Network Neighborhood icon from the Windows menu. Select on Properties.
2.
The system automatically detects the absence of Windows NT Networking. Click on the Yes button to start installation.
47
3.
Tick on the "Wired to Network" once the following screen appears. Click on the Next to proceed.
4.
Click on the Start Search button for the program to locate the Network Adapter.
48
5.
Once setup finishes the search, it will list a number of adapters for you to choose from. Press on the Have Disk button to assign the driver path location.
6.
Setup now asks you for the location of the driver. When you have entered the new driver path, press on the OK button to continue.
7.
When Setup finds the information it needs about the new driver, it will display the device it found on the following screen. Press on the OK button to accept and proceed.
49
8.
Setup then returns to Network Setup Wizard screen and displays your new Network Adapter. Click on Next to continue.
9.
The Network Setup Wizard then allows you to set the Network Protocols on your network. Select the appropriate protocol and then click on Next to continue.
50
10.
The Network Setup Wizard then allows you to set the Network Services on your Network, then click on Next to continue.
11.
Before Setup starts installing the components found and the settings you made, it will give you the option to proceed or go back for changes from the following screen. Click on the Next button once you are sure of your devices.
51
12.
Windows NT Setup will then need to copy files necessary to update the system information. Specify the path then press Continue.
13.
Once it finishes copying the files, Setup will now allow you to choose the Duplex Mode of your LAN controller. Press on the Continue button after making your selection.
14.
When Setup asks if you wish to change the TCP/IP settings of your system, select the appropriately. The default choice is No.
15.
When the screen below appears, click on Next to continue.
52
16.
Setup then prompts you that it is ready to start the network. You may complete the installation thereafter. Click on Next to continue.
17.
Restart your computer. The LAN driver installation for WIN NT4.0 is now complete.
5.3
1.
Audio Driver Installation
With the Utility CD Disk still in your CD ROM drive, open the File Manager and then select the driver folder. (If in E:, type E:\HS-2606 Driver\AC97)
5.3.1 Audio Driver Installation for WIN98/2K/XP
53
2.
Press "Setup.exe" and to go setup.
3.
Once the Welcome screen appears on the screen, make sure to close applications that are running and then click the Next button.
54
4.
The Select Components dialog box is now displayed. Select on Install driver and then click on Next.
5.
After the audio driver installation finishes, select the Finish button to complete the installation process.
55
5.3.2 Audio Driver Installation for WINNT
1.
With the Utility CD Disk still in your CD ROM drive, open the File Manager and then select the driver folder. (If in E:, type E:\HS-2606 Driver\AC97)
2.
Press "Setup.exe" and to go setup.
56
3.
Once the Welcome screen appears on the screen, make sure to close applications that are running and then click the Next button.
4.
The Select Components dialog box is now displayed. Select on VT8233/VT8235 and then click on Next.
57
5.
After the audio driver installation finishes, select restart computer now, and click the Finish button to complete the installation process.
58
5.4
1.
USB2.0 Driver Installation
With the Utility CD Disk still in your CD ROM drive, right click on "My Computer" icon from the Windows menu. Select on System Properties and then proceed to the Device Manager from the main menu.
5.4.1 Win 98
2.
Select on Other Devices from the list of devices then double-click on PCI Universal Serial Bus.
59
3.
The PCI Universal Serial Bus Properties screen then appears, allowing you to re-install the driver. Select Driver from the main menu to proceed.
4.
When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed.
60
5.
Tick on the "Search for a better driver" once the following screen appears. Click on the Next to proceed.
6.
Once the program returns to the Add New Hardware Wizard screen, your specified location will appear. Press on the Next button to continue.
61
7.
When Setup finds the information it needs about the new driver, it will display the device it found on the following screen. Press on the Next button to accept and proceed.
8.
Once the InstallShield Wizard completes the operation and update of your USB2.0 driver. Click on the Finish button to complete the installation process.
62
5.4.2 Win 2000
1.
With the Utility CD Disk still in your CD ROM drive, right click on "My Computer" icon from the Windows menu. Select on System Properties and then proceed to the Device Manager from the main menu. Select on Other Devices from the list of devices then double-click on PCI Universal Serial Bus.
2.
3.
The PCI Universal Serial Bus Properties screen then appears, allowing you to re-install the driver. Select Driver from the main menu to proceed.
63
4.
When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed.
5.
Tick on the "Search for a suitable driver" once the following screen appears. Click on the Next to proceed.
64
6.
Once the program returns to the Add New Hardware Wizard screen, your specified location will appear. Press on the Next button to continue.
7.
Choose sisusb2.inf and press on the Open button to accept and proceed.
65
8.
Once the InstallShield Wizard completes the operation and update of your USB2.0 driver. Click on the Finish button to complete the installation process.
5.4.3 Win XP
1.
With the Utility CD Disk still in your CD ROM drive, open the File Manager and then select the driver folder. (If in E:, type E:\HS-2606 Driver\USB2.0)
66
2.
Click on "Setup.exe" and to go setup.
3.
When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed.
67
4.
The programs starts to install the USB2.0 driver when you click the Next> button on the screen below.
5.
Once the InstallShield Wizard completes the operation and update of your USB2.0 driver. Click on the Yes button to restart computer to complete the installation process.
68

▲Up To Search▲

Price & Availability of HS-26061

	To Download HS-26061 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .